Do You Need an Electrician to Change a Pool Light?

Replacing a pool light might seem like one of those DIY chores, but when it comes to electrical hardware and water, safety always comes first. While pool lighting systems are built to handle moisture and water exposure, replacing a pool lightbulb or making repairs should be above all precise.

Whereas pool owners often lean on things like a robot pool cleaner or pool vacuum to keep the water clear, electrical issues entail more expertise. In this article, we will address whether it is safe to replace your pool light on your own when you need to call out an electrician, and how pool cleaning robots such as Beatbot AquaSense Pro can ensure the overall health of your pool.

When do you need an electrician to replace the pool light?

Sometimes, the best thing you can do for pool lights is to leave it to the professionals. Below are the major reasons to call an electrician:

Wiring Issues or Water Damage

If your pool light is failing because the wiring is faulty or it has been damaged by water, it is best to call in a professional. An electrician will be able to diagnose the problem and make sure the wiring is safe and up to local codes.

Grounding and/or Improper Installation

An electrician can resolve these problems and prevent serious electrical complications if the light is not properly grounded, or there was an error in its original setup.

Adhering to Local Electrical Regulations

Electrical work on pools is considered necessary for safety reasons in some places and therefore must be done by a licensed electrician. (You’ll want to verify with your local government to make sure you’re in compliance with these codes.)

Corroded Fixtures or Parts

If you see any signs of corrosion on the fixture or any part of the light system, it’s safer to hire an electrician to check for the damage. Corrosion can cause malfunctions in those electrical components, which can be dangerous for your pool.

Can You Change a Pool Light Yourself?

Basic repairs, such as changing a bulb or replacing a gasket, don’t require calls to an electrician. Here’s how to replace your pool light safely:

DIY Steps on How to Replace a Pool Light Bulb

Turn Off the Power

Make sure the power to the pool lighting is off at the breaker before doing any work.

Remove the Fixture

Loosen the screws of the light fixture by hand using screwdrivers. The majority of pool lights are made to be pulled up from water.

Replace the Bulb

After the fixture is in place, simply pull out the old bulb and insert a new bulb rated for underwater use. Ensure proper sealing of the gasket and bulb to prevent water ingress.

Reinstall the Fixture

Install the new bulb, reattach the fixture, and ensure everything is tightly fastened.

Test the Light

Once the light fixture is reassembled, turn the power back on for a few moments to test the new bulb.

When Not to DIY

If it’s something beyond a simple replacement of a bulb, like a short circuit or water intrusion into the light housing, it’s probably best to call an electrician to do the repair.

Cleaning Your Pool: The Function of A Robot Cleaner

Swimming pool lighting could relate to complicated electric professional work and a robotic pool cleaner would help you maintain the cleanliness of your pool just by doing the work for you. These automatic cleaners, such as the Beatbot iSkim Ultra and the Beatbot AquaSense Pro help clear the dirt, debris, and algae from your pool, thus keeping your water clean and safe for swimming.

Advantages of a Pool Robotic Cleaner

Hands-Free: Set it and Forget it! That is why the swimming pool robot cleaner will do the job for you and save you time.

They Can Be Efficient and Thorough — Using advanced technology, robotic pool cleaners can navigate around obstacles and clean pool floors, walls, and the waterline. For an even more efficient clean, you can try SweepScrub, a robotic cleaner designed to tackle tough debris and reach all areas of your pool with precision.

Save Yourself Time & Effort: Owning a pool vacuum robot or robotic pool cleaner means you are delegating the tedious work you do to keep your pool as clean as a whistle.

This means different kinds of pool vacuums and skimmers because to have a clean pool, you must catch debris on the surface as well as on the floor.

Be sure to Observe Safety When Changing Pool Lights

If you are taking on the task itself, or hiring a pro, safety is the name of the game. Some key safety tips include:

Always Use Proper Tools

When working with electrical components be certain you are using the proper gear and tools, for example, waterproof gloves and non-conductive screwdrivers.

Inspect for Damage

Before you start, take a look at the light fixture for any signs of damage, corrosion, or wear and tear. If you see any signs of damage, it’s better to send for an expert.

Electric work needs an electrician, so hire an electrician

If you aren’t sure about how to handle the electrical parts of pool light replacement, a professional will ensure that the work is done safely and properly.

So do you need an electrician to replace the pool light?

Now, unfortunately, replacing a pool light bulb is usually a DIY task, however, if the issue occurs with something electrical, you need a licensed electrician. Electrical work around water can be risky, better safe than sorry.

Furthermore, it is essential to keep the pool clean and well-maintained, and using a robot pool cleaner, especially the Beatbot AquaSense series, makes sure your pool is always swim-ready. From a pool vacuum robot to a swimming pool robot cleaner, these must keep all things in mind to provide a top-level clean performance without any headache.